LACTOSCAN
Technical specifications - part II
Correct ambient conditions for optimal analysis results:
air temperature |
from 10°C to 35°C |
relative humidity |
from 30% to 80% |
power supply |
220V (110V) |
Installation requirements:
| Dimensions | 240/220/100 mm, mass 3,0 kg |
| Milk sample volume per one measure | 25 cm³ (= 25 ml.) |
• 220 V +10/-15%
• 110 V / 50-60 Hz
• 2,4 V DC
Note
CV (Coefficient of variation) is equal to the Sd (Standard deviation) divided by average of reference results multiplied by 100.
Reference methods used are:
Röse Gottlieb for fat,
Kjeldahl for protein,
Polarimetry or enzymatic method for lactose,
Heating Oven for total solids,
Cryoscope for FPD.
Printer option for all Lactoscan versions
For print out of results and for service status of Lactoscan, a thermal printer can be connected to the device. Lactoscan has been adapted and tested to operate with the following thermal printers: (you may order your device with a printer or connect the printer producers)
The thermal printer can be ordered locally through Seiko Printers. Link to your local Seiko Printer supplier: http://www.siiprinters.com. Choose in the top-bar the thermal printer called: "Standalone".
You may also see distributor list.
Click the small image
to see a photo of the SEIKO thermal printer.Printer type: DATECS ESC/POS.
The thermal printer can be ordered locally through Datecs Printers. Link to Datecs Printer supplier: http://www.datecs.bg
Click the small image
to see a photo of the DATECS thermal printer.
